Start With What the MG20 Is Made Of
The MG20 Mercedes-AMG is part of a lineup that uses high-performance materials including magnesium and carbon fiber, with a design language drawn from Mercedes-AMG racing and performance vehicles. That mix of metal and leather-look surfaces is what gives the headset its bold look, and it is also why a little routine care goes a long way. The two areas that collect the most everyday grime are the ear pads and the exposed trim.
The supplied product information does not include a manufacturer cleaning procedure, specific cleaners, or care intervals for the MG20. The routine below is built around general, low-risk habits for metal and leather-like surfaces, so treat it as practical guidance rather than an official instruction. If you are unsure about a product or a surface, test on a small hidden area first.
The MG20 at a Glance
- MG20 Mercedes-AMG: The Mercedes-AMG lineup of headphones and earphones features high-performance materials including magnesium and carbon fiber and delivers bold, exhilarating sound. Knowing the materials helps you choose gentle tools and avoid abrasive cloths that could dull the trim.

MG20 Mercedes-AMG - MG20 Mercedes-AMG: Mercedes-AMG racing and performance vehicles are defined by power, meticulous workmanship, and daring design. The design intent is a precise, performance-inspired look, so small smudges and dust show up more than on plain finishes.
A Simple Weekly Pad and Trim Routine
Do this when the headset is powered off and unplugged, and keep liquids away from any openings or ports.
- 1. Wipe the ear pads first: Use a dry or barely damp soft microfiber cloth. Wipe the pad surface in gentle circles to lift skin oils and dust. Avoid soaking the pads or pressing hard into seams.
- 2. Follow with the trim and hinges: Switch to a clean, dry corner of the cloth for the magnesium and carbon fiber surfaces. Dry wiping is the safest default for exposed metal and composite trim.
- 3. Clear the crevices: Use a dry soft brush or a dry cotton swab to lift dust from the gap between the pad and the housing. Do not poke anything sharp into the seam.
- 4. Let everything air-dry: If any surface feels damp, leave the headset unfolded in open air before storing it. Never put a damp headset straight into a case.
Habits That Protect the Finish
- Keep hands clean before you listen: Oils and lotions transfer to the pads and trim quickly. A quick hand wash before a long session is the cheapest maintenance you can do.
- Skip harsh chemicals: Alcohol-heavy sprays, abrasive cleaners, and rough paper towels can dull or scratch finished surfaces. Stick with a soft microfiber cloth and plain water where a damp wipe is needed.
- Watch hair and skincare products: Gels, sprays, and heavy moisturizers can leave residue on the pads. Wiping the pads after use limits buildup.
- Rotate the headband position slightly: Small changes in how the headset sits spread contact pressure and help the pads and trim wear more evenly.
Storage Makes the Biggest Difference
Most pad and trim wear happens between listening sessions, not during them. Dust settles into the pad surface, sunlight fades finishes, and pressure from a tight bag can crease the pads. Store the MG20 in a case or a clean, dry drawer away from direct sun, and avoid hanging it by the headband for long periods.
If you use a hard case, make sure the headset is fully dry before it goes in. A silica gel packet in the case can help with lingering moisture in humid rooms, but keep it out of direct contact with the pads.
What to Do and What to Avoid
- Do: dry microfiber wipe after use: Fast, safe, and effective for everyday dust and oils on pads and trim.
- Avoid: soaking or rinsing the pads: The supplied information does not confirm the pads are removable or water-resistant, so keep liquid use minimal and surface-only.
- Do: store unfolded in a case: Reduces pressure creases in the pads and protects the trim from scuffs.
- Avoid: leaving the headset on a sunny sill: UV exposure and heat are hard on leather-like surfaces and finishes over time.
When to Consider Replacement
If the pads start to flake, crack, or lose their shape despite regular cleaning, replacement is usually the next step rather than more cleaning. The supplied MG20 record does not list replacement pad compatibility, so check the current accessory listings or contact support before ordering. The same applies to any trim part: confirm the part fits the MG20 Mercedes-AMG specifically rather than assuming a similar model will match.
Keeping the headset clean and stored well is the most reliable way to delay that decision. A two-minute wipe-down each week and a dedicated storage spot will do more for the look of your MG20 than any occasional deep clean.


